SCH2505 no.8188-1/5 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn8188 SCH2505 pnp / npn epitaxial planar silicon transistor push-pull circuit applications applications ? mosfet gate drivers, relay drivers, lamp drivers, motor drivers. features ? composite type with a pnp / npn transistor contained in one package facilitating high-density mounting. ? ultrasmall package permitting applied sets to be small and slim. specifications ( ) : pnp absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)60 v collector-to-emitter voltage v ceo (--50)50 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)400 ma collector current (pulse) i cp (--)800 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8m) 1unit 0.4 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)40v, i e =0 -- 100 na emitter cutoff current i ebo v eb =(--)4v, i c =0 -- 100 na dc current gain h fe v ce =(--)2v, i c =(--10)50ma (200)300 (500)800 gain-bandwidth product f t v ce = -- 10v, i c = -- 50ma (690)500 mhz output capacitance cob v cb = -- 10v, f=1mhz (3.8)2.8 pf collector-to-emitter saturation voltage v ce (sat) i c =(--)100ma, i b =(--)10ma (--60)50 (--120)100 mv base-to-emitter saturation voltage v be (sat) i c =(--)100ma, i b =(--)10ma (--)0.9 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0 (--50)60 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0 (--)5 v marking : ed continued on next page. any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 12505ea ts im tb-00001084
SCH2505 no.8188-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit turn-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. (170)340 ns fall time t f see specified test circuit. (30)55 ns package dimensions electrical connection unit : mm 2237 switching time test circuit 0 0 --100 --50 collector-to-emitter voltage, v ce -- mv i c -- v ce collector current, i c -- ma it05118 --200 --150 --300 --250 --500 --450 --400 --350 --200 --600 --400 --800 --1000 --100 --500 --300 --700 --900 i b =0 --200 a --1ma --500 a --2ma --5ma --10ma --15ma --50ma --30ma --20ma --25ma --40ma 0 0 350 400 300 200 250 500 450 200 150 100 50 500 1000 800 900 100 300 400 600 700 collector-to-emitter voltage, v ce -- mv i c -- v ce collector current, i c -- ma it05106 i b =0 200 a 600 a 1ma 2ma 3ma 5ma 7ma 8ma 30ma 20ma 15ma 10ma [pnp] [npn] 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 sanyo : sch6 1.6 1.6 1.5 0.05 0.5 0.05 0.56 0.25 0.2 0.2 1 3 2 64 5 v r r b v cc =25v v be = --5v ++ 50 w input output r l 220 m f 470 m f pw=20 m s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =200ma for pnp, minus sign is omitted. 5 6 1 4 23 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 top view
SCH2505 no.8188-3/5 it05123 collector current, i c -- ma v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 --1000 --100 2 3 5 7 2 3 5 7 --10 7 ta=75 c --25 c 25 c i c / i b =20 collector current, i c -- ma v ce (sat) -- i c it05109 1.0 23 5 10 100 72357 1000 23 57 2 5 7 3 2 100 3 10 --25 c 25 c ta=75 c i c / i b =20 it05410 collector current, i c -- ma v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --100 2 2 3 5 7 3 --10 ta=75 c --25 c i c / i b =10 collector current, i c -- ma v ce (sat) -- i c it05411 1.0 23 5 10 100 72357 1000 23 57 2 5 7 5 7 3 2 100 3 10 --25 c 25 c ta=75 c i c / i b =10 [pnp] [npn] it05120 3 100 collector current, i c -- ma h fe -- i c dc current gain, h fe --1.0 2 3 5 7 --10 2 3 5 7 2 3 5 7 --100 --1000 2 3 5 1000 7 5 7 ta=75 c 25 c --25 c v ce = --2v 1.0 10 100 1000 3 257 3 257 3 257 1000 100 2 2 3 3 5 7 5 7 collector current, i c -- ma h fe -- i c dc current gain, h fe it05108 v ce =2v ta=75 c 25 c --25 c [pnp] [npn] collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv 25 c it05119 0 0 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- ma --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --200 --600 --500 --400 --300 --100 ta=75 c 25 c --25 c v ce = --2v it05107 0 200 300 600 500 400 100 0 0.2 0.4 0.6 0.8 1.2 1.0 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- ma ta=75 c --25 c v ce =2v [pnp] [npn] 25 c
SCH2505 no.8188-4/5 it05121 --1.0 collector current, i c -- ma f t -- i c gain-bandwidth product, f t -- mhz 23 57 23 57 23 57 --10 --100 --1000 100 1000 5 7 2 3 v ce = --10v 1.0 5 3 100 1000 7 5 3 2 1000 100 27 5 3 27 5 3 27 10 collector current, i c -- ma f t -- i c gain-bandwidth product, f t -- mhz it05113 v ce =10v [pnp] [npn] it05122 --1.0 1.0 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf --10 2 3 5 7 2 3 5 7 --100 2 3 5 7 10 f=1mhz 27 35 2 7 35 10 100 1.0 10 1.0 7 5 3 2 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf f=1mhz [pnp] [npn] it05125 collector current, i c -- ma v be (sat) -- i c 2 --1.0 3 5 7 2 --1.0 23 57 --10 23 57 23 57 --100 --1000 ta= --25 c i c / i b =20 it05111 it05112 1.0 23 5 357 10 272357 100 1000 10 1.0 0.1 7 5 3 2 7 5 3 2 collector current, i c -- ma v be (sat) -- i c 75 c ta= --25 c 25 c i c / i b =20 base-to-emitter saturation voltage, v be (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v 25 c 75 c it05124 collector current, i c -- ma v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 3 --1000 2 3 5 7 2 3 5 7 2 --100 --10 i c / i b =50 ta=75 c --25 c 25 c it05110 v ce (sat) -- i c collector current, i c -- ma 1000 2 3 100 7 5 2 3 7 5 10 1.0 23 5 10 100 7 23 5 7 23 5 7 1000 i c / i b =50 --25 c 25 c ta=75 c collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv
SCH2505 no.8188-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of january, 2005. specifications and information herein are subject to change without notice. ps 0 0 20 40 60 80 100 120 500 400 300 100 200 140 160 p c -- ta collector dissipation, p c -- mw it06712 mounted on a ceramic board (600mm 2 5 0.8mm) 1unit ambient temperature, ta -- c [pnp / npn] f=1mhz 0.1 0.1 base current, i b -- ma ron -- i b on resistance, ron -- w it06092 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 1.0 10 out in i b f=1mhz --0.1 0.1 base current, i b -- ma ron -- i b on resistance, ron -- w it06093 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 --1.0 --10 out in 1k w 1k w 1k w 1k w i b
|
